KMC-1337EPG 系列
動樑動柱門型加工中心機
  • 機械規格
    • X軸行程
      13500
    • Y軸行程
      4400
    • Z軸行程
      1100
    • W軸行程
      1100
    • 主軸孔維度
      ISO 50
    • 刀庫容量
      60,(*90)
    • 刀軸轉速
      V-6000,(*8000)/H-3500
    • 主軸馬達(連續/30分鐘)
      30/35HP
  • *特別指定本公司保留隨時修改上述規格
    • 產品概述
    • 1、 A new high-rigging dynamic pillar-type structure for the long and large workpiece processing to create.
      2、 The use of high load capacity of the fixed table; the overall area than the average machine to save more than 25%.
      3、 X-axis dual-column drive, the use of dual-motor pre-pressure gear, rack speed reduction mechanism, with large size high load, high precision roller linear guide, rapid feed up to 30 m / min; Greatly improve productivity.
      4、 Y axis on the track for the sliding and rolling of the composite design, the upper and lower rail for the ladder track.
      5、 The main structure of the FEM structure analysis, to ensure that static rigidity.
      6、 Beam for the box structure, the configuration of tough ribs, with excellent bending and torsional stress.
      7、 X-axis installation of dual optical feet, synchronous system to ensure that the positioning accuracy of ± 0.01 / 4000mm.
      8、 The standard head library with vertical head and horizontal head, 2 position AAC automatically perform head change action. More additional head library needs, can be expanded to 3 to 5 positions.
      9、 The knife to draw oil pressure dividing motor drive, according to the demand to select the appropriate number of knives.
      10、 KMC-EPG on behalf of the ultimate rigidity, efficiency, accuracy, processing capacity of the perfect performance.